Filter
Top Products
Selecting the Digital Attenuator (DIG.ATT)
When listening to a CD or other source on which the recording level is high, setting the
equalizer curve level to “H” (high) may result in distortion.
You can switch the digital attenuator to “L” (low) to reduce distortion. (Sound quality
when the setting is “H” (high) is better than when the setting is “L” (low), so usually set to
“H” (high).)
Selecting the Contrast (CONTRAST)
You can adjust the contrast of the product’s display.
2. Select the desired Contrast
with the 2/3 buttons.
The display shows “+7” – “–7”.
1. Press the FUNCTION button and select the Contrast mode (CONTRAST)
in the Initial Setting Menu.
2. Select the desired attenuation
level with the 2/3 buttons.
L Ô H
1. Press the FUNCTION button and select the Digital Attenuator mode
(DIG.ATT) in the Initial Setting Menu.
48
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS