Filter
Top Products
39
Using the Digital Signal Processor (DSP)
Recalling the Equalizer Curves
You can easily recall equalizer curves.
1. Press the DSP button and select the Graphic Equalizer mode (50Hz) in the
DSP Menu.
Note:
• When you have performed Auto-equalizing (refer to page 41), you can turn AUTO EQ ON and
OFF by pressing the button for the equalizer curve that was called.
Button Display Equalizer Curve
1 USER 1 User 1
2 USER 2 User 2
3 FLAT Flat
13-Band Graphic Equalizer Adjustment
The user curves (User 1, 2) let you make fine adjustments to equalizer curve frequency
levels. Adjustments are automatically memorized.
1. Press the DSP button and select the Graphic Equalizer mode (50Hz) in the
DSP Menu.
2. Recall User curve (User 1 or 2). (Refer to previous section.)
4. Adjust the level with the 5/∞
buttons.
The display shows “+6” – “–6”.
3. Select the band to be adjusted
with the 2/3 buttons.
50 Ô 80 Ô 125 Ô 200 Ô 315
Ô 500 Ô 800 Ô 1.3 k Ô 2 k
Ô 3.2 k Ô 5 k Ô 8 k Ô 12.5 k (Hz)
“USER 2”
2. Select the desired equalizer
curve with one of the buttons
from 1 to 3. (e.g. Press button
2.)