Filter
Top Products
When in the IP BUS mode, some operations
can be performed with the head unit. When
using this unit as an external unit and in the
IP BUS mode, refer to Function compatibility
on the next page and Function mode operation
on the next page, and operate with the appro-
priate buttons.
Switching power ON
When using this unit as an external unit and
in the IP BUS mode, performing the following
steps switches power ON.
1 Switch the display image source to this
product.
For details, refer to the manual of the con-
nected unit.
2 Press SOURCE on the head unit.
Press repeatedly until source DVD is selected.
For details, refer to the manual of the con-
nected unit.
Notes
! You cannot switch the head unit’s source with
remote control of this unit.
! When you have switched the power of this
unit ON by pressing POWER, turning the head
unit OFF can not switch this unit OFF.
! When you have switched the power of this
unit ON by pressing POWER, be sure not to
forget to switch the power of this unit OFF.
Operating with the head
unit
En
42
Section
11