Filter
Top Products
Troubleshooting
Common
Symptom Cause Action (See)
Power doesn’t turn on.
The unit doesn’ t operate.
Leads and connectors are incor-
rectly connected.
Confirm once more that allconnections are
correct.
The fuse isblown. Rectify the reasonfor the fuse blowing,then
replace the fuse. Be very sure to installthe
correct fuse withthe same rating.
Noise and other factors are causing
the built-in microprocessor tooper-
ate incorrectly.
Press RESET.(Page9)
Playback is notpossible. The disc isdirty. Clean disc. (Page 48)
The loaded discis a type thisunit
cannot play.
Check what typethe disc is.
Non compatible videosystem disc
is loaded.
Change to adisc compatible to your video
system.
No sounds areheard.
The volume levelwill not rise.
Cables are notconnected correctly. Connect thecables correctly.
The unit is performing still, slowmo-
tion or frame-by-frame playback.
There is nosound during still, slowmotion or
frame-by-frame playback.
The icon
is displayed, andop-
eration is notpossible.
The operation is prohibited for the
disc.
This operation is not possible.
The operation is not compatible
with the disc’s organization.
This operation is not possible.
The picture stops(pauses) and
the unit cannotbe operated.
Reading of datahas become impos-
sible during playback.
After pressing g once,start playback once
more.
There is nosound.
Volume level islow.
The volume levelis low. Adjust the volumelevel.
The attenuator ison. Turn the attenuator off.
There is audioand video skip-
ping.
The unit is not firmlysecured. Secure theunit firmly.
The picture isstretched, the as-
pect is incorrect.
The aspect settingis incorrect for
the display.
Select the appropriate setting for your display.
(Page 38)
When the ignition switch is
turned ON (orturned to ACC),
the motor sounds.
The unit is confirming whethera
disc is loadedor not.
This is anormal operation.
Problems during DVD playback
Symptom Cause Action (See)
Playback is notpossible. The loaded dischas a different re-
gion number from thisunit.
Replace the disc with one featuringthe same
region number asthis unit. (Page 6, Page 54)
A parental lockmessage is dis-
played and playbackis not pos-
sible.
Parental lock ison. Turn parental lockoff or change thelevel.
(Page 39)
Additional Information
En
45
Appendix
Additional Information