Filter
Top Products
12
BASIC OPERATION
12. AS/PS BUTTON
When shortly pressing the APS button on the front panel or the A/P button on the
remote controller, the radio searches for each preset station. When the field
strength level is more than the threshold level of stop level, the radio is holding at
that preset number for few seconds with releasing mute, and then searches again.
In FM band, FM 1,FM 2 and FM 3 is checked one at a time When long pressing
the APS or A/P button (more than 1 second), the radio searches from the current
frequency and checks the signal strength level until 1 cycle search is finished.
And then 6 strongest stations are preset to the corresponding preset number.
The AS operation is implemented in the each band of selected band. When the
AS operation is finished, the radio executes the preset scan.
13. MU BUTTON
Press it to mute down sound. Press it again to release this mode and recover
previous volume level.
14.CLK BUTTON
Press it to change the display to clock display. Press it again to return to previous
display. In clock display, press and hold for about 2 seconds until the hour display
flashes. Rotate VOL +/- button to adjust hours, press CLK button to flash mintue
then rotate VOL +/- button to adjust minutes.
15. PWR BUTTON
Press it to turn on the unit. Press it again to turn off.
16.
BUTTON
Pressing
during playback will stop play temporary. Return to normal playback,
press once again.
17.
/ BUTTON
A. When long pressing the
/ button (more than 2 seconds) during play, the
speed of rapid forward/reverse changes according to the disc as follow.
DVD/VCD/CD/MP3:
B. Shortly press the
/ button during playback to skip to next track or back
one track.
Note: For some VCD2.0 discs (PBC-playback control),
and buttons may
be unavailable.
C. Press UP or DN button on the remote controller or
/ on the front panel to
manually tune up or down for your desired station. Press them hold for more
than 2 seconds to automatically tune up or down for the stronger station.
Normal Playback 2X 4X 6X 8X