Filter
Top Products
22
3. Press
E
to store the frequency into the channel.
Notes:
• If you made a mistake in Step 2,
Error
appears
and the scanner beeps when you press
E
. Simply
start again from Step 2.
• Your scanner automatically rounds the entered
frequency to the nearest valid frequency. For
example, if you enter a frequency of 151.473,
your scanner accepts it as 151.475.
•Press
DELAY
if you want the scanner to pause 2
seconds on this channel after a transmission
ends before it proceeds to the next channel (see
“Delay” on Page 26). The scanner also stores
this setting in the channel.
4. If you want to program the next channel in
sequence, press
MANUAL
and repeat Steps 2 and 3.
LIMIT SEARCH
If you do not know a frequency to store, you can search
for transmissions within a range of frequencies you se-
lect, called the
limit search range
. Then you can store
any interesting frequencies you find into channels.
1. Press
MANUAL
, enter the channel number where you
want to store a frequency, then press
MANUAL
again.
The channel number appears.
2. Use the number keys and
•
to enter the frequency
that is the lower limit of the range you want to
search.
3. Press
LIMIT
.
20-520.fm Page 22 Wednesday, August 4, 1999 3:06 PM