Filter
Top Products
49
2. Press
DATA
.
3. Repeatedly press s or t to select
E1
, then press
DATA
again.-
4. Repeatedly press s or t to select the name of the
map you want (such as
P7
), then press
E
.
The scanner then searches for transmissions using the
preset map you chose.
Note:
When the scanner searches for transmissions,
you see Type I fleet and subfleet IDs such as
100-12
,
100-9
,
000-12
, or
400-8
.
How do you know if the preset map you selected is cor-
rect? Listen to see if you are following complete conver-
sations. If not, try another preset map.
Programming a Fleet Map
1. Select the bank where you want to program the fleet
map by pressing a number key.
2. Press
DATA
.
3. Repeatedly press s or t until
E1
appears, then press
DATA
.-
4. Repeatedly press s or t until
USr
appears.
5. Press
DATA
.
20-520.fm Page 49 Wednesday, August 4, 1999 3:06 PM