Filter
Top Products
9
1. Press down on the battery compartment cover and
slide the cover in the direction of the arrow to
remove it.
2. Disconnect the battery pack’s connector from the
scanner’s connector. Then remove the battery pack
from the battery compartment.
3. Attach the new battery pack's connector to the bat-
tery socket inside the battery compartment. Then
put the battery pack into the compartment.
4. Replace the cover.
When the scanner’s battery gets low, blinks and
the scanner beeps about every 15 seconds.
Important: At the end of a rechargeable battery pack's
useful life, it must be recycled or disposed of properly.
Contact your local, county, or state hazardous waste
management authorities for information on recycling or
disposal programs in your area. Some options that might
be available are: municipal curb-side collection, drop-off
boxes at retailers such as your local RadioShack store,
recycling collection centers, and mailback programs.
Using Standard AC Power
To power the scanner from AC power, use the supplied
AC adapter/charger. Plug the adapter/charger's barrel
plug into the scanner's
EXT. PWR
jack. Then plug the AC
adapter/charger's power module into a standard AC out-
let.
20-520.fm Page 9 Wednesday, August 4, 1999 3:06 PM