Filter
Top Products
35
1. Hold down
TRUNK
until the scanner beeps twice.
BANK
,
TRUNK
,
and the bank numbers flash.
2. Select the bank you want to store the trunked sys-
tem’s frequencies in by pressing a number key. The
scanner automatically selects the first channel in the
bank when you select the bank.
3. Use the number keys to enter the trunked system’s
frequencies, then press
E
.
Note:
If you entered an invalid frequency in Step 3,
the scanner beeps, the channel number flashes and
Error
appears. If this happens, press
•
to clear
the frequency, then repeat Step 3.
4. Press either
MANUAL
or s to select the next channel
in the bank.
20-520.fm Page 35 Wednesday, August 4, 1999 3:06 PM