Filter
Top Products
41
SCAN LISTS
When you program trunked frequencies into a bank (see
“Programming Trunked Frequencies” on Page 34), your
scanner sets up 5 scan lists into which you can store
your favorite IDs. Each list can contain up to 10 IDs, so
you can store a total of 50 IDs for each trunk tracking
bank (500 IDs if you use all banks as trunking banks!).
Scan lists help you organize trunking system users into
categories. For example, you might use List 1 for police
IDs, List 2 for fire department IDs, List 3 for emergency
medical service IDs, and so on. Once IDs are stored in
lists, you can scan them like you scan conventional
channels. You can program IDs into scan lists manually,
during a search, or automatically.
Manually Storing IDs into Scan Lists
1. Select the trunking bank you want (see “Scanning a
Trunked Bank” on Page 36).
2. After the scanner begins trunk tracking, press
MAN-
UAL
. A bar appears at the top of the display, showing
the current scan list.
3. Repeatedly press s or t to select the scan list loca-
tion (shown at the top of the display) you want to
program.
20-520.fm Page 41 Wednesday, August 4, 1999 3:06 PM