Filter
Top Products
UN7000 7” Widescreen Universal Monitor Page 8
Dimming the Backlight
The Widescreen Universal Monitor features an adjustable backlight
that dims or brightens the monitor to enhance viewing in varying
lighting conditions.
To adjust the backlight:
1. Press the Menu button on the monitor or Monitor Menu on
the remote control. The OSD menu appears.
COLOR
BRIGHT
TINT
MENU
MODE
FORMAT
RESET
DIMMER
2. Press Menu on the monitor or Monitor Menu on the remote
control until the arrow points to “Dimmer.”
3. Press or to turn the dimmer on or off.
4. Press Menu on the monitor or Monitor Menu on the remote
control three times to exit the menu. The menu disappears
after 5 seconds if no buttons are pressed.
Adjusting the Color, Brightness, and Tint
If necessary, you can adjust the color, brightness, and tint of the
monitor.
To adjust color, brightness, or tint settings:
1. Press the MENU button on the monitor or Monitor Menu on
the remote control. The OSD menu appears.
2. Press MENU on the monitor or on the remote control until the
arrow points to “Color,” “Brightness,” or “Tint.”
3. Press the and buttons to adjust the setting. The setting
will be displayed on the screen, as shown. There are 64 steps
of adjustment. The default setting is 32 on a 64-step scale.
Operating Guide
UN7000 7” Widescreen Universal Monitor Page 9
COLOR
32
MENU
MODE
4. Press Menu on the monitor or Monitor Menu on the remote
control again to exit the menu. The menu disappears after
5 seconds if no buttons are pressed.
Image Formats
The Widescreen Universal Monitor includes three image formats:
“Normal,” “Full,” and “Zoom.” “Normal” is used in most VHS
applications. “Full” can use the widescreen image produced by
DVDs. In order to use the DVD’s “enhanced for 16:9 television,”
(sometimes known as anamorphic video or widescreen) set the
monitor’s image format to “Full.”
To change the image format:
1. Press Menu on the monitor or Monitor Menu on the remote
control. The OSD menu appears.
2. Press Menu on the monitor or Monitor Menu on the remote
control until the arrow points to “Format.”
3. Press or to select a format.
4. Press Menu on the monitor or Monitor Menu on the remote
control again to exit the menu. The menu disappears after 5
seconds if no buttons are pressed.
Normal Full
Zoom
Operating Guide