Filter
Top Products
49
̈ Guide the BNC cable with the BNC connector through the hole on the
rack mount “ear”.
̈ Hook the two rack mount “ears” ƾ to the rear panel of the twin receiver.
̈ Secure the rack mount “ears” to the twin receiver using two of the
supplied recessed head screws (M 3x6) respectively.
̈ Screw the two BNC sockets ƿ to the antenna holders using the
supplied plain washers and nuts.
̈ Screw the two antenna holders to the handles of the twin receiver.
̈ Connect the two BNC connectors to the BNC sockets µ (ANT II) and Ƹ
(ANT I) at the rear of the twin receiver.
̈ Slide the twin receiver into the 19” rack.
̈ Secure the rack mount “ears” to the rack.
̈ Connect the telescopic antennas ƽ to the BNC sockets ƿ.
̈ Pull the telescopic antennas out and align them upwards in a V-shape.
Note:
Use remote antennas (available as accessories) when the receiver
position is not the best antenna position for optimum reception.
ƾ
ƿ
ƿ
ƽ
ƿ
EM_550_G2.book Seite 49 Donnerstag, 27. November 2003 1:33 13