Filter
Top Products
44
Indications and displays
Each receiver of the EM 550 G2 provides information on its own operating
states and those of the received ew 500 G2 transmitter (remote displays).
Indications and displays of the receivers
“PILOT” display
The “PILOT” display ቨ appears on the display panel when the pilot tone
evaluation is activated (see “Activating/deactivating the pilot tone
evaluation” on page 61).
Diversity display
The receivers operate on the true diversity principle (see “Diversity
reception” on page 67).
The diversity display ቧ indicates whether diversity section I (i.e. antenna 1)
or diversity section II (i.e. antenna 2) is active.
Button backlighting
During standby operation, the ON button ² is backlit in red. When the
receiver is switched on, the SET button ´ and the ̆/̄ button ¿ are
additionally backlit in green.
Remote displays of an ew 500 G2 transmitter
Transmitter battery status indication
The 4-step transmitter battery status display ቫ provides information on the
remaining battery/accupack capacity of the received ew 500 G2 transmitter:
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery icon flashing LOW BAT
In addition, the text “LOW BAT” (backlit in red)
flashes in alternation with the standard display.
ቨ
ቧ
¿
´
²
ቫ
EM_550_G2.book Seite 44 Donnerstag, 27. November 2003 1:33 13