29
HT-DV40H
HT-DV50H
Preparation for Use
Rating setting
1 Select “SYSTEM SET UP” on the Set up menu screen (see
steps 1 - 6 on page 23).
2 Before setting “RATING”, ensure password is unlocked
“ ”. The “RATING” level cannot be set if the password is
locked “ ”.
3 After selecting “RATING” in steps 1 - 6 on page 23, select the
rating level and press the ENTER button to confirm.
4 After entering rating level, select “PASSWORD” to lock the
password key.
5 Enter a 4-digit password using the Direct Search buttons
and press the ENTER button.
*If this is the first time, enter “0000” as factory default password.
* Level 8: for most restrictive viewing ===> Level 1: for general
audiences viewing.
The smaller the number, the greater the level of restriction.
Note:
Whilst playing a disc with parental lock, the display may appear
requesting a password in order to watch some restricted scenes. In
such case, enter the password to temporarily change the parental
level.
Password setting
From the set up menu, select “SYSTEM SET UP”, “PASSWORD”
and choose “----- ”.
1 When setting the password for the first time, enter the
factory default password by pressing “0000”. The “ ” will
be unlocked.
2 Enter your new password (maximum 4-digits) using the
Direct Search buttons and press ENTER button to return.
The “ ” will be locked.
3 Enter again the same new password and press ENTER
button to return. The “ ” will be unlocked.
4 To change to another password, repeat steps 2 - 3.
5 Exit set up.
Note:
If you forget your password, cancel the current password by pressing
“0000” using the Direct Search buttons.
Indicator Setting
1 KID SAFE Only DVD software intended for children can be
played back.
2G to 7 NC-17 Only DVD software intended for general use and
children can be played back.
8 ADULT DVD software of any grade (adult/general/
children) can be played back.