Filter
Top Products
51
HT-DV40H
HT-DV50H
USB Memory Playback
Notes:
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory’s format support FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
This USB memory cannot be operated via USB hub.
If “UNSUPPORT WMA” is displayed, it means “Copyright
protected WMA file” is selected.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
The larger the capacity of the USB storage device, the longer it will
take for the data to be read.
Some USB multi-reader devices may not work correctly with the
USB terminal on this unit.
External storage devices cannot be played back using the USB
terminal on this unit.
This unit only supports “MPEG-1 Audio Layer-3” and “MPEG-2
Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2.5 Audio Layer-3” and MP1, MP2 format are not
supported.
Playlists are not supported on this unit.
The playback time may not be displayed correctly when playing
back a variable bitrate file.
Use only the supplied USB cable.
Advanced USB playback
Repeat play (REMOTE CONTROL ONLY)
Repeat play can play single track and all track sequence
continuously.
Whilst a disc is playing, each time the button is pressed, the repeat
mode changes in the following order:
Random play (REMOTE CONTROL ONLY)
The tracks can be played in random order automatically.
In case of an USB mode:
To random play all tracks:
Press the SHIFT and RANDOM buttons on the remote control so
that random indicator lights up in the display window.
1 2 3
4 5 6
7 8 9
+100
REP: [REP 1]
REP: [REP DIR]
“1-REPEAT”
“ALL REPEAT”
Repeat the currently
playing track.
Repeat the currently
playing directory.
REP: [REP ALL]
REP: [OFF] “NORMAL”
Repeat the currently
playing USB.
The normal playback
.
“FOLD REPEAT”