Filter
Top Products
24
Other useful features
Setting when using external
devices
Input source settings
Input Label
Setup
You can label each input source with a custom
description.
Press b to select the desired input
source.
Go to “MENU” > “Setup” > “Input Label”.
Press a/b/c/d to select each character
of the new name for the input source, and
then press ;.
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
DVD
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
–_
I
S
.
J
T
0123456789
Repeat until the label is fully spelt out.
NOTE
The label can be six characters or less.
When you want to set an input source label of less than six
characters, select “END” to set the name.
INPUT SOURCE
TV
EXT1
DVD
EXT3
NOTE
You cannot change labels if the input source is “TV”.
Skipping specified inputs
Input Skip
Setup
This setting allows you to set the input source you want
to skip during “INPUT SOURCE” selection operations.
EXT1
EXT2
EXT3
[Yes]
[No]
[No]
1
2
3
4
•
•
•
Reset
Reset
Setup
If complex adjustments are made so that the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
Go to “MENU” > “Setup” > “Reset”.
Press c/d to select “Yes”, and then press
;.
After the reset has completed, the power shuts off and
then comes back on. The screen will have returned to its
original settings.
NOTE
PIN input is required when executing “Reset”. The default
PIN is “1234”. To change the PIN setting, refer to Password/
Parental lock settings (Page 22). To clear the PIN setting (PIN
input will no longer be needed), refer to CLEARING THE PIN
(Page 24).
Identification
Identification
Setup
You can check the TV ID on the screen for reporting to
customer service.
Software update
If you use DVB-T, the TV automatically receives the
update service and updates new software. When a
confirmation message is received about the software
update on the screen, follow the screen prompts.
CAUTION
Do not disconnect the AC cord when the software update
is in progress. If you have the problem, ask qualified service
personnel.
CLEARING THE PIN
If you lose or forget your PIN, you can clear the PIN
following these steps.
Go to “MENU” > “Setup” > “Child Lock”.
Enter the four-digit number on page 32 to
clear your PIN.
NOTE
As a precautionary measure, make a note of your PIN on the
back of this operation manual, cut it out and keep it in a safe
place that children cannot reach.
1
2
•
•
•
1
2
•