Sharp LC-32DH57S Car Satellite TV System User Manual


 
25
Connecting a PC
Connecting a PC
HDMI Connection
PC HDMI 1, 2 or 3
HDMI-certified cablen
PC HDMI 2*
DVI/HDMI cableo ø 3.5 mm stereo
minijack cable
p
When using the HDMI 2 terminal, you must select the proper
item in the “PC Audio Select” menu depending on the type of
HDMI cable connected (Refer to page 19 for details).
Analogue Connection
PC EXT 4*
RGB cableq ø 3.5 mm stereo
minijack cable
r
PC EXT 4*
DVI/RGB conversion
cable
s ø 3.5 mm stereo
minijack cable
t
When using the EXT 4 terminal, you must select “EXT 4 (RGB)”
in the “PC Audio Select” menu (Refer to page 19 for details).
*
*
NOTE
The PC input terminals are DDC1/2B-compatible.
Refer to page 30 for a list of PC signals compatible with the TV.
When connecting to a PC, the input signal type is automatically
detected.
Displaying a PC image on the
screen
Selecting the picture size
You can select the picture size.
Press f.
The “WIDE MODE” menu displays.
Press f or a/b to select a desired item.
EXAMPLE
Normal Full
Item
Full
An image fully fills the screen.
Cinema
For letterbox pictures. Bars may appear on the
top and bottom with some programmes.
Normal
Keeps the original aspect ratio in a full screen
display.
Dot by Dot
Displays an image with the same number of
pixels on the screen.
NOTE
Connect the PC before making adjustments.
Selectable picture size may vary with input signal type.
Refer to page 23 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (60 Hz)/1080i/1080p
1
2