Filter
Top Products
23
Deutsch
English
10 Operation of the monitor
Open the monitor by briefly pressing the “OPEN” button . Now the monitor is opened
automatically and fixed in the flipped-open position. The monitor can be closed again by
pressing the “OPEN” button again.
If the monitor doesn’t close as a result, it may not be in the correct position. Then there will be
the error message “ERROR – MONITOR NOT CENTERED!!”
Note:
Before beginning to drive, please familiarize yourself sufficiently with the device and avoid
longer entries during the drive for your own safety!
10.1 Swivelling the monitor outward
To better read and operate the screen, it’s possible to
swivel the monitor of the device by about 30° to the right
and left. For this, first open the monitor with the “OPEN”
button as described above. Then you can swivel the
monitor by pulling it towards you carefully from the lower
right or left edge of the screen. Never use force during
the process, otherwise you might damage the device. To
swivel the monitor back, just press it back into the original
position.
Illustr. 10.1