Filter
Top Products
46
Deutsch English
the display.
When the monitor is open, the screen menu is also available to you for these functions.
15.5 Fast forward and rewind
To fast forward, briefly press the button once. Then the playback speed is increased to 2x. If
the button is pressed once more, the speed is doubled again. This can be continued up to the
maximum advancing speed of 32x. You can stop this process by briefly pressing the button
once or pressing the button one more time after the advancing speed of 32x has been
reached. For a quick rewind, use the button in a corresponding manner. To control the
process, the increasing or decreasing minute and second amount is indicated on the display.
When the monitor is open, the screen menu is also available to you for these functions.
15.6 Repeating tracks (Repeat)
To repeat a track, keep the button pressed until “R-ONE“ appears on the display. The
abbreviation “RPT” is shown and the current track is repeated. To repeat the entire folder or CD,
press the button again until “R-ALL“ appears on the display. When the monitor is open, the
messages “SPUR” will appear for “R-ONE” and “ALL” for “R-ALL”.
To end the function, press the button again until “R-OFF“ appears on the display. The
abbreviation “RPT” will be turned off and the playback of the tracks will continue normally.
15.7 Intro
To briefly scan the tracks on an audio CD, press the button during the playback until “INT“
appears on the display. Then all tracks will be scanned for approx. ten seconds. When the
monitor is open, the message “INT” will appear.
To end the function, press the button again until the “INT“ message is turned off on the
display. The playback continues at the point where the last intro was interrupted.