Filter
Top Products
28
DSR Series
41.32 : TAPE/AUTO SELECT
The TAPE/EE mode is selected by the value of the DATA-1.
[DATA-1]
00 : AUTO
01 : TAPE
FF : Depends on the DEVICE.
41.36 : TIMER MODE SELECT
This command is used to select the TIMER system used in the AUTO mode by the value of
DATA-1. This is used for the IN ENTRY, OUT ENTRY, IN PRESET, OUT PRESET, PRE-
ROLL and CUE UP WITH DATA, etc.
[DATA-1]
00 : TIME CODE
01 : TIMER-1
02 : TIMER-2
FF : Depends on the DEVICE.
41.37 : INPUT CHECK
When DATA-1 is set to “01”, VIDEO and all AUDIO Channels are set to Forced EE mode.
When DATA-1 is set to “00”, the Forced EE modes of VIDEO and all AUDIO channels are
released.
41.3D : PREREAD MODE SELECT
This command is used to select the PREREAD editing in accordance with the contents of the
DATA-1.
[DATA-1]
00 : DISABLE
Invalidates the PREREAD editing mode.
01 : ENABLE
Validates the PREREAD editing mode.
FF : Depends on the DEVICE.