Sony 85P Car Stereo System User Manual


 
34
DSR Series
DATA-1
Event No.
(Lower byte)
Event No.
(Upper byte)
DATA-2
BIT-7 BIT-6 BIT-5 BIT-4 BIT-3 BIT-2 BIT-1 BIT-0
GEN UB GEN TC
42.C5 : CLEAR EVENT
This command is used to delete the event which is defined by the “4X.C4: DEFINE EVENT”
command.
[DATA-1, DATA-2]
0000h : Deletes all events. (All clear) The event number returns to 0001h and the
EVENT buffer and the unsuccessful EVENT buffer are initialized.
0001h to FFFFh : Specifies the event number of the event to be deleted.
The event numbers to be deleted are specified by DATA-1 and DATA-2. When events are
deleted, the subsequent events will not be used to fill the blanked events, but the blanked events
are left blank.
41
..
..
.CB : BREAK
The processing which is equivalent to the “20.00 : STOP” command is executed and the
timeline is stopped.
[DATA-1]
00h : The processing which is equivalent to the “20.00 : STOP” command is executed immedi-
ately and the timeline is stopped.
61
..
..
.0A : TC GEN DATA SENSE
This command is used to request the TIME CODE data that the DEVICE is generating, and the
DEVICE will make a response according to the contents of the DATA-1.
[DATA-1]
DATA-1=01 : Request for GEN TC ...................... “74
..
..
.08 : GEN TIME DATA”
DATA-1=10 : Request for GEN UB ..................... “74
..
..
.09 : GEN UB DATA”
DATA-1=11 : Request for GEN TC & UB ........... “78
..
..
.08 : GEN TC & UB DATA”
74
..
..
.08 : GEN TC DATA
When the DEVICE receives the “61
..
..
.0A : TC GEN DATA SENSE” command and its DATA-1
is “01”, the TC TIME data generated by the DEVICE will be added to the DATA-1 through
DATA-4 of the “74
..
..
.08 : GEN TIME DATA” command.
For the data format, refer to “24
..
..
.31 : CUE UP WITH DATA”.
74.09 : GEN UB DATA
When the DEVICE receives the “61.0A : TC GEN DATA SENSE” command and its DATA-1
is “10”, the TC UB data generated by the DEVICE will be added to the DATA-1 through
DATA-4 of the “74.09 : GEN UB DATA” command.
For the data format, refer to “4X.05 : USER’S BIT PRESET”.