Filter
Top Products
50
DSR Series
DATA-1
Event No.
(Lower byte)
Event No.
(Upper byte)
DATA-2
62.C4 : EVENT DATA SENSE
This command is used to request the contents of the event which is defined by the “4X.C4 :
DEFINE EVENT” command.
[DATA-1, DATA-2]
This specifies the event number which is requested by DATA-1 and DATA-2. The event
number is a 16-bit data from 0001h to FFFFh, in which 0000h cannot be specified.
7X.C4 : EVENT DATA
This return command is returned in response to the “62.C4 : EVENT DATA SENSE” command
from the CONTROLLER. The contents of definition of event are returned. If the specified
event has not been defined yet, “70.C4” is returned.
For the data format, refer to “4X.C4 : DEFINE EVENT”.
60.C6 : TIMELINE STATUS SENSE
This command is used to request the various statuses such as the status of the buffer for event
definition, execution status of event, etc.