Filter
Top Products
9
Operation
Overview of the remote control buttons
To temporarily switch off TV
Press to temporarily switch off TV. Press again to switch on
from standby mode. To save energy, we recommend
switching off completely when TV is not in use.
NOTE: After 15-30 minutes without a TV signal and
without any button being pressed, the TV switches
automatically into standby mode.
To select input signal or freeze teletext
Press to select inputs from the TV sockets (see Using
Optional Equipment section). In Teletext mode, press to
freeze the displayed page. Press once again to cancel.
To return to previous channel
Press to return to the previous channel you were watching.
Note: This can be done only after watching the present
channel for 5 seconds.
To display the menu
Press if you wish to use the TV menu system. Press again to
remove the menu from the TV screen.
To select menu items
Use the OK button and arrow keys to select the options
available in the menu system of this TV.
To select Electronic Programme Guide (EPG)
Press to switch EPG on and off.
To change screen format
Press to change the format of the screen. See ‘Changing the
screen size’ section of this manual for details.
Fastext keys
See Teletext section of manual for details.
To select channels
Press to select channels.
To mute sound
Press to mute TV sound. Press again to restore the
sound.
To reveal on screen information
Press to reveal all on-screen indications. Press
again to cancel. In teletext mode, press to reveal
concealed information (eg answers to a quiz) then
press to cancel.
To select channels
Press the numbered buttons to select channels.
For double digit programme numbers, e.g.23, press
-/-- first, then the buttons 2 and 3.
To return to TV mode
Press to return to the normal operation from teletext
mode or standby mode.
To select Teletext
Press to switch Teletext on and off.
To display picture menu
Press to change the picture settings. Press the OK
button to remove the display.
To display sound menu
Press to change the sound settings. Press the OK
button to remove the display.
To adjust TV volume
Press to adjust the volume of the TV.