Filter
Top Products
11
Individual Setting
When you select there will be no personal pre-selection. lets you make your own individual selection of themes,
limiting the search to the marked ones.
1. Select using v or V. Push B to enter.
The menu Individual Settings is displayed.
2. Select the item you wish to mark using v or V. Confirm by pressing OK.
Repeat step 2 for all the items you wish to have in your list.
3. When finished with the list, select using B and press OK.
Using the ‘Long Info’ menu
1. Select a future programme in the column programme list using v or V. Press OK.
The long info menu is displayed.
You may wish to record the selected programme with your VCR.
(only with Smartlink VCRs)
2. Select using b and press OK.
This information is transferred to the VCR connected to your set.
Setting up ypur VCR
3. Select VPS/PDC by pushing b repeatedly.
4. Select Speed using V.
5. Select VCR Setup using V.
6. Select using B. Press OK.
You are back in the last menu.
07 Tue
12:38
Address Mapping
The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.
If other values are set, the complete
combination will be scrolled.
Example:
if the DPWC is set to '63', the char-
Speed
Timer Prog
VPS/PDC
SP
VCR1
On
This channel has been set for a timer
First nextTView/EPG-Providers in Europe
SWISS TXT TPS / RINGIER nexTView
Tue 07. 04 .98
With this setting on, you have the guaranteed recording of the whole broadcast
should there be a change in the TV programme. This only works if the selected
channel broadcasts a VPS/PDC signal.
• Select On or Off using OK.
Select between standardplay (SP) or longplay (LP) mode.With longplay you can
record twice as much on a videotape. The picture quality, however, may suffer.
• Select SP or LP using OK.
Operation
NexTView*
Select with which of the connected Smartlink VCRs you wish programme.
• Select VCR 1 or 2 using OK.