Filter
Top Products
16
Using the TV menu system:
Using the Features menu
Features
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV 2 Output
Off
Off
TV
Select: Enter:
Off
On
10 min
Sleep Timer
AV 2 Output
TV
AV 1
AV 2
AV 3
AV 4
Format Correction
Off
On
Auto Format
Off
On
Parental Lock
Off
On
Changing the screen size
This feature allows you to change the size of the TV picture.
Press the button on the remote control repeatedly or use the v or V buttons to select one of the
following formats then press the OK button to confirm your selection:
Wide for 16:9 broadcasts.
Zoom widescreen format for letterbox movies.
14:9 compromise between 4:3 and 16:9 picture size.
4:3 conventional 4:3 picture size, full picture information.
Smart imitation of wide screen effect for 4:3 broadcasts.
In Smart, Zoom and 14:9 modes parts of the top and bottom of the screen are cut off. Press v or V to adjust
the position of the image on screen (eg to read subtitles) then press the OK button to confirm.
Smart
Wide
Zoom
14:9
4:3
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the v or V buttons to select for the ‘Features’ menu then press B to enter the ‘Features’
menu.
3. Press the v or V buttons to select the desired menu item then press B to confirm. For a description
of the menu items and their effects, see the table below.
4. Press the v, V, B or b buttons to select the desired setting.
5. Press the OK button to confirm your choice of setting.
6. Repeat steps 3-5 if you wish to select any of the other items.
7. Press the MENU button to remove the menu from the TV screen.
Item Effect/Operation
Auto Format* V Off: Size of picture does not automatically adjust.
*only for aerial signal v On: The TV will automatically adjust the picture size to eliminate any
dark areas on the TV picture (as shown below):
Format Correction* V Off: 4:3/14:9 is selected.
(*only if Auto Format is v On: Smart mode is selected automatically for 4:3/14:9 broadcasts.
set to ‘On’)
Sleep Timer You can select a time after which the TV switches itself into
standby mode.
V Off
v 90 min
Parental Lock V Off: No parental lock.
v On: This feature disables the buttons on the TV when the set is in standby
mode. It is only possible to switch the set back on by pressing a
button on the remote control.
AV2 Output V TV audio/video signal from the aerial .
AV1 audio/video signal from scart 1.
AV2 audio/video signal from scart 2.
AV3 audio/video signal from scart 3.
v AV4 audio/video signal from connectors on front of the TV.