Filter
Top Products
Location and Function of Parts and Controls
22
Bottom
a COMPOSITE connector (BNC)
Input connector for composite signals.
b Y/C connector (4-pin mini-DIN)
Input connector for Y/C signals.
c G/Y connector (BNC)
Input connector for component Y (luminance) and G of
RGB signals.
d B/P
B connector (BNC)
Input connector for P
B (blue color difference) of
component signals and B of RGB signals.
e R/P
R connector (BNC)
Input connector for P
R (red color difference) of
component signals and R of RGB signals.
f EXT SYNC (External sync) connector (BNC)
When this unit operates on an external sync signal,
connect the reference signal from a sync generator to
this connector.
Select “EXT” in “SYNC” of the USER CONFIG menu
(on page 32) to use the sync signal through this
connector.
Note
When inputting a video signal with the jitters, etc. the
picture may be disturbed. We recommend using the
TBC (time base corrector).
g Optional input slots
An optional input adaptor can be attached according to
your requirements. Press the INPUT key to select the
signals.
h /I (Equipotential/Function Earth) terminal
(equipotential) terminal
Connects the equipotential plug.
I (function earth) terminal
Connects the earth cable.
i AC IN socket
Connect the supplied AC power cord.
j Loop-through output connectors
The signals input to the input connectors (1, b, c,
d, e and f) are output here. Connect to the
equipment according to the input signal.
When the cable is connected to this connector, the 75-
ohm termination of the input automatically released, and
the signal from the input connector is output from this
connector.
k DVI input connector (DVI-D)
DVI Rev.1.0 applicable digital RGB signal is input.
To view SXGA signals when the DVI input is selected,
use the cable within 3 m (118
1
/8 inches) in length.
l HD15 input connector (HD D-Sub 15 pin)
An analog RGB video signal (0.7 Vp-p, positive
polarity) and sync signal are input.
The Plug & Play function corresponds to DDC2B.
+
–
+
–
1 2 3 4 5 6 7
8qa
qs qd qf09