Filter
Top Products
Specifications
39
Video signal formats
The unit is applicable to the following signal formats.
*1 The signal format is displayed as 1080/60I on the
screen.
A slightly squashed picture is displayed at a little
lower position, because the picture is displayed in
1035/1080 picture ratio on a 16:9 screen. Adjust the
position to the center using the SHIFT V setting (on
page 32).
*2 The frame rate is also compatible with 1/1.001.
Input
System Total lines Active lines Frame rate*
2
Scanning format Aspect ratio Signal standard
575/50I (PAL) 625 575 25 2:1 interlace 16:9/4:3 EBU N10
(PAL: ITU-R BT.624)
480/60I (NTSC) 525 483 30 2:1 interlace 16:9/4:3 SMPTE 253M
(NTSC: SMPTE 170M)
576/50P 625 576 50 Progressive 16:9/4:3 ITU-R BT.1358
480/60P 525 483 60 Progressive 16:9/4:3 SMPTE 293M
1080/50I 1125 1080 25 2:1 interlace 16:9 SMPTE 274M
1035/60I
*
1
1125 1035 30 2:1 interlace 16:9 SMPTE 260M/BTA S-001B
1080/60I 1125 1080 30 2:1 interlace 16:9 SMPTE 274M/BTA S-001B
720/60P 750 720 60 Progressive 16:9 SMPTE 296M
Output
System Effective picture size Frame rate*
2
Scanning format
575/50I (PAL) 1024 × 576/1024 × 768 50 Progressive
480/60I (NTSC) 1024 × 576/1024 × 768 60 Progressive
576/50P 1024 × 576/1024 × 768 50 Progressive
480/60P 1024 × 576/1024 × 768 60 Progressive
1080/50I 1024 × 576 50 Progressive
1035/60I
*
1
1024 × 576 60 Progressive
1080/60I 1024 × 576 60 Progressive
720/60P 1024 × 576 60 Progressive