Filter
Top Products
Adjustment Using the Menus
33
REMOTE menu
USER MEMORY menu
Submenu Setting
PARALLEL
REMOTE
Select the REMOTE connector pins for
which you want to change the function.
You can assign various functions to 1 to
4 pins and 6 to 8 pins. The following
lists the functions you can assign to the
pins.
• – – (“– –”: No function is assigned.)
•COMPOSITE
•Y/C
•RGB
• COMPONENT
•DVI
•HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• UNDERSCAN
• OVERSCAN
• ZOOM
•NATIVE
•4:3
•16:9
•TALLY
• EXT SYNC (External Sync)
Notes
• If you use the parallel remote
function, you need to connect
cables. For more details, see
page 38.
• When “OFF” is selected in the
INPUT SELECT menu and the
function is assigned, the remote
function does not work. Select
“ON” to use the parallel remote
function (on page 35).
xPARALLEL REMOTE...
· SERIAL REMOTE xxxxxxx
REMOTE
SERIAL REMOTE Select one out of following three
modes.
• RMT OFF: You cannot use the serial
remote. Adjust settings by the
keys on the front panel.
• RMT ON: You can use the serial
remote. You cannot use the keys
except for the serial remote
setting on the front panel.
• RMT & LCL: You can use both the
serial remote and the keys on the
front panel.
Notes
• When “RMT ON” is selected, the
REMOTE and - indicator on the
front panel light.
• When “RMT & LCL” is selected,
the REMOTE indicator lights.
Submenu Setting
x09 USER09
· 10 USER10
· 11 USER11
· 12 USER12
· 13 USER13
· 14 USER14
· 15 USER15
· 16 USER16
USER MEMORY (2/3) Rr
x17 USER17
· 18 USER18
· 19 USER19
· 20 USER20
USER MEMORY (3/3) Rr
x01 USER01
· 02 USER02
· 03 USER03
· 04 USER04
· 05 USER05
· 06 USER06
· 07 USER07
· 08 USER08
USER MEMORY (1/3) Rr