Filter
Top Products
Adjustment Using the Menus
31
Scan mode image
*1 The image illustrated shows the input signal by
broken line and the efficient picture size by the solid
line.
*2 NORMAL: 7% over scan
OVER: 20% over scan
*3 –3% under scan
*4 NTSC, PAL, 480/60I and 575/50I signals are
displayed in the same size image. (The illustrations
show the image when 480/60I signals are input.)
PIC DELAY MIN Selects to set the delay by the
picture processing to the minimum
level when the NTSC, PAL, 480/
60I or 575/50I signal is input.
• 0: Mode for giving precedence
to the picture quality
(recommended mode). This is a
mode suitable for an animation
and a still picture. It takes
longer than “1” or “2” for
processing the picture.
• 1: The processing time is short
and this is a mode suitable for an
animation.
• 2: The processing time is short
and this is a mode suitable for a
still picture.
Submenu Setting
Input
NORMAL/
OVER
SCAN
*2
UNDER
SCAN
*3
ZOOM
–
NATIVE
*4
4
3
16
9
Image displayed
*1
3
4
9
16
3
4
9
16
9
16
768
533
1024
711
768
1024
711
400