Sony DSM-T1 Car Satellite Radio System User Manual


 
14
SDTI
DIGITAL INPUTIN
AUDIO (AES/EBU)SDI
CH 1/2 CH 3/4
DIGITAL INPUTIN
REF IN
SPARE BREAKER AC IN
IF OUTMONITOR
AUDIOVIDEO
ANALOG INPUTIN
CH1
CH2
Low noise block converter
High power amplifier
Up converter
Satellite link
SDTI(SX)
equipment
SDI
equipment
Analog
equipment
BKSM-R103
Analog Output
Board
BKSM-R102
SDI Output
Board
BKSM-R101
SDTI(SX) Output
Board
DSM-R1 Digital Satellite Demodulator
Signal generator
(Sony Tektronix TSG-170A for the
NTSC broadcasting standard, Sony
Tektronix TSG-271 for the PAL
broadcasting standard, etc.)
Spectrum analyser
AC power cord
to a wall outlet
DNW-A100/A100P
Digital Video Hybrid Recorder, etc.
BVW-75/75P Video Cassette
Recorder, etc.
DVW-A500/A500P Digital Video Cassette Recorder,
DNW-A100/A100P Digital Video Hybrid Recorder,
DNW-7/7P Digital Camcorder with the CA-701 SDI Adaptor, etc.
Any two
IF OUT REF IN
to test signal output
IF MONITOR
AC IN
AUDIO CH2
AUDIO CH1
VIDEO
SDI
to SDI output
SDTI
to SDTI(SX) output
BKSM-T103
Analog Input Board
BKSM-T102
SDI Input Board
BKSM-T101
SDTI(SX) Input Board
Rear
to monitor input
to analog
composite video
output
to analog
audio output
(channel 1 or 3)
to analog
audio output
(channel 2 or 4)
When using the 3pin XLR connector
to signal output
to reference
signal input
Connection
The illustration below shows a typical connection of
the unit for digital Satellite News Gathering.
There are two kinds of connectors on the BKSM-T103
Analog Input Board, 3-pin XLR or 5-pin XLR connector.
When using the 5-pin XLR connector, see also the next
page.
For more information about connecting external
equipment, refer to the equipment operation manuals.