Sony DSM-T1 Car Satellite Radio System User Manual


 
9
5 IF OUT (Intermediate Frequency output)
connector (BNC type)
Outputs modulated IF signals to an up-converter.
6 IF MONITOR connector (BNC type)
Outputs IF signals to an IF monitor such as a spectrum
analyzer.
7 y (ground) jack
Connects to a ground wire.
8 BREAKER button
Excessive current in the internal circuitry, will trip the
primary circuit breaker, automatically cutting off the
power. After checking that the problem has been
corrected, press the BREAKER button to restore the
power.
9 ~ AC IN socket
Connects to an AC power outlet using the optional AC
power cord. This socket accepts 100 to 240 V AC
power.
SDTI (Serial Data Transport Interface)
connector (BNC type)
Inputs digital video and audio signals in SDTI (SX)
format from the SDTI output connector on the DNW-
A100/A100P Digital Video Hybrid Recorder, etc.
SDI (Serial Digital Interface) connector
(BNC type)
Inputs digital video and audio signals in SDI format
from the SDI output connector on the DVW-A500/
A500P Digital Video Cassette Recorder, etc.
!™ AUDIO (AES/EBU) connectors (BNC type)
Input 2-channel digital audio signals in AES/EBU
format from the AES/EBU audio output connectors on
external equipment.
CH 1/2: Inputs AES/EBU audio signals on channels
1 and 2.
CH 3/4: Inputs AES/EBU audio signals on channels
3 and 4.
VIDEO connector (BNC type)
Inputs composite analog video signals from the video
output connector on the BVW-75/75P Video Cassette
Recorder, etc.
AUDIO connectors (XLR type, 3-pin, female)
Input analog audio signals (2 channels) from the audio
output connectors on the BVW-75/75P Video
Cassette Recorder, etc.
CH 1: Inputs analog audio signals on channel 1.
CH 2: Inputs analog audio signals on channel 2.
!∞ AUDIO connectors (XLR type, 5-pin, male)
Input analog audio signals (4 channels) from the audio
output connectors on the BVW-75/75P Video
Cassette Recorder, etc.
CH 1/2: Inputs analog audio signals on channel 1
and 2.
CH 3/4: Inputs analog audio signals on channel 3
and 4.
The 5-pin XLR type can be converted to the 3-pin
XLR (2 channels) with the optional CCXA-53 audio
cable. The ITT CANNON XLR-3-11-11 conversion
adapter can be also used to convert to the 3-pin XLR.