Filter
Top Products
15
Operation Warnings
Error Messages
When a fault is detected by the self-diagnosis function
that automatically performs after the power is turned
on, all the indicators flash and an error message
(ERROR-XX) appears in the display window. The
indicators do not turn off until the power is turned off.
For more information about error messages, refer to the
Maintenance Manual.
Warning Messages
When a fault is detected while the unit is in operation,
the ALARM indicator lights up and a warning message
(0X WARNING) appears in the display window.
When the operation returns to normal, the ALARM
indicator turns off.
Use the list below to check the meaning of the warning
messages.
Warning Message Meaning
number
01
02
03
04
05
When using the 5-pin XLR connector
1)With the 5-pin XLR connector, use the optional CCXA-53
conversion audio cable or the conversion adapter.
Setting a password
If the PASSWORD is set to “ON” in the menu, set a
password for the unit so that it matches that of the
DSM-R1. If the password of the unit does not match
that of the DSM-R1, the “PASSWORD
INCORRECT” warning message appears in the
display window of the DSM-R1 and no audio/video
signals are output from the DSM-R1.
If the PASSWORD is set to “OFF” in the menu, the
DSM-R1 outputs the audio/video signals regardless of
the password of the DSM-R1.
For more information, see “Menu Setup” (page 10).
FAN (REAR)
STOP
FAN
(SW REG)
STOP
REF
UNLOCK
IN1 DATA
OVERFLOW
IN2 DATA
OVERFLOW
The rear fan has stopped
running.
The internal fan has stopped
running.
This unit is not synchronized
with the reference signal
selected with REF SELECT in
the menu.
Inputted signals from the
BKSM-T101 SDTI Input Board
in the IN1 section have
oveflowed and are not being
transmitted.
Inputted signals from the
BKSM-T101 SDTI Input Board
in the IN2 section have
oveflowed and are not being
transmitted.
REF IN
SPARE
IF OUTMONITOR
ANALOG INPUTIN
AUDIOVIDEO
CH1/2
CH3/4
Signal generator
(Sony Tektronix TSG-170A for the
NTSC broadcasting standard, Sony
Tektronix TSG-271 for the PAL
broadcasting standard, etc.)
BVW-75/75P Video Cassette
Recorder, etc.
REF IN
to test signal output
to signal output
AUDIO CH3/4
VIDEO
BKSM-T103
Analog Input Board
Rear
to analog
composite
video
output
to analog
audio output
(
channel 1 and 2
)
to analog
audio output
(
channel 3 and 4
)
1)
1)
AUDIO
CH1/2
to reference
signal input