Filter
Top Products
16
Specifications
General
Power voltage AC 100 to 240 V, 50/60 Hz
Current consumption 1.2 A to 0.6 A
Operating temperature 0°C to 40°C
(32°F to 104°F)
Operating humidity 10% to 90%
(non condensing)
Storage temperature –20°C to +60°C
(– 4°F to +140°F)
Dimensions 424 × 43.6 × 525 mm (w/h/d)
(16
3
/4 × 1
3
/4 × 20
3
/4 inches)
Mass 8 kg (17 lbs 10 oz) (when
two BKSM-T102 are
installed)
Transmission mode IF bandwidth: 18 MHz
1 channel, real time
IF bandwidth: 36 MHz
1 channel, twice real time
(when the BKSM-T101 is
installed) or 2 channels,
real time
Carrier bandwidth IF bandwidth: 18 MHz
18 MHz at –40 dB point
IF bandwidth: 36 MHz
36 MHz at –40 dB point
Modulation QPSK
IF (Intermediate Frequency)
70 or 140 MHz selectable
Error correction Reed-solomon + convolution
(R=7/8, 3/4)
Video characteristics
Compression MPEG2 4:2:2P@ML
Video input connectors
When the BKSM-T101 is
installed:
SDTI (SX): BNC type × 1,
75 Ω
SMPTE 305M
When the BKSM-T102 is
installed:
SDI: BNC type × 1, 75 Ω
SMPTE-259M/
ITU-R.BT.656-3
When the BKSM-T103 is
installed:
VIDEO: composite analog,
BNC type × 1, 1.0 V p-p,
75 Ω
REF IN:
composite analog,BNC type
× 1, 1.0 V p-p, 75 Ω
Audio characteristics
Audio input connectors
When the BKSM-T101 is
installed:
SDTI: SDTI-embedded
When the BKSM-T102 is
installed:
AUDIO (AES/EBU): SDI-
embedded, BNC type × 1 or
AES/EBU, BNC type × 2,
selectable
When the BKSM-T103 is
installed:
3-pin XLR × 2 (female)
AUDIO CH1: analog audio
AUDIO CH2: analog audio
+4 dBu, High impedance
5-pin XLR × 2 (male)
AUDIO CH1/2: analog audio
AUDIO CH3/4: analog audio
+4 dBu, High impedance
Channels/source 4 (R=7/8), 2 (R=3/4)
Sampling frequency 16 bits/48 kHz
IF characteristics
IF output connectors IF OUT: BNC type × 1,
75 Ω, –20 dBm to 0 dBm,
70/140 MHz selectable
IF MONITOR:
BNC type × 1, 75 Ω, –10 dB
for the IF OUT
Supplied accessories
Operating Manual (1)
Installation Manual (1)