Filter
Top Products
19
Troubleshooting
REMOTE PARALLEL menu
Select the PARALLEL REMOTE connector pins for which you
want to change the function.
You can assign various functions to 1 to 4 pins and 6 to 8 pins. The
following lists the functions you can assign to the pins.
REMOTE PARALLEL
• ––– (“–––”: No function is assigned.)
• LINE A
• HDMI
• RGB/COMP
• 16:9
• 4:3
• UNDER
• OVER
• TALLY R
• TALLY G
• EXT SYNC
• BLUE ONLY
• 16:9 MARKER
• 4:3 MARKER
• CENTER MARKER
• FULL
• SDI
If you use the PARALLEL REMOTE function, you need to
connect cables.
For more details, see page 21.
KEY INHIBIT menu
You can lock the setting so that they cannot be changed by an
unauthorized user.
Select OFF or ON.
If you set “ON”, all items are displayed in blue, indicating the
items are locked.
Troubleshooting
This section may help you isolate the cause of a problem and as a
result, eliminate the need to contact technical support.
• The display is colored in green or purple t Select the
correct input from the RGB/COMP SEL setting in the USER
CONFIG menu (page 17).
• The unit cannot be operated t The key protection function
works. Set the KEY INHIBIT setting to OFF in the KEY
INHIBIT menu.
x1PIN xxxxx
· 2PIN xxxxx
· 3PIN xxxxxxx
· 4PIN xxxxxxx
· 6PIN xxxxxxxx
· 7PIN xxxxxxxxx
· 8PIN xxxx
REMOTE PARALLEL
xKEY INHIBIT xxx
KEY INHIBIT