Filter
Top Products
20
Specifications
Specifications
Picture performance
LCD panel a-Si TFT Active Matrix
Picture size 20.1 type
433 × 271 × 511 mm
(W/H/Diagonal)
(17
1
/8 × 10
3
/4 × 20
1
/8 inches)
Resolution 1,680 × 1,050 dots (WSXGA+)
Viewing angle 89° / 89° / 89° / 89° (typical)
Scan Under –3 %
Over 5 %
Aspect 16 : 10
Display color 16,700,000
Input/output connectors
Input
LINE A input connectors
Y/C input 4-pin mini-DIN (1)
VIDEO input BNC type (1), 1 Vp-p ±3 dB, negative
synchronization
AUDIO input Phono jack (1), –5 dBu 47 kilohms or
higher
RGB/COMPONENT input connectors BNC type (3)
RGB input 0.7 Vp-p ±3 dB, (Sync On Green,
0.3 Vp-p negative sync.)
Component input
0.7 Vp-p ±3 dB, (75 % chrominance
standard color bar signal)
AUDIO input Phono jack (1), –5 dBu 47 kilohms or
higher
OPTION IN connector
D-sub 9-pin (1), female
OPTION AUDIO IN connector
Phono jack (1), –5 dBu 47 kilohms or
higher
External synchronized input connector
BNC type (1), 0.3 to 4 Vp-p negative
polarity binary
HDMI IN connector
HDMI (1)
PARALLEL REMOTE input connector
Parallel remote Modular connector 8-pin (1)
Output
LINE A output connectors
Y/C output 4-pin mini-DIN (1), Loop-through,
with 75 ohms automatic terminal
function
VIDEO output BNC type (1), Loop-through, with
75 ohms automatic terminal
function
AUDIO output Phono jack (1), Loop-through
RGB/COMPONENT output connectors
RGB/Component output
BNC type (3), Loop-through, with
75 ohms automatic terminal
function
AUDIO output Phono jack (1), Loop-through
External synchronized output connector
BNC type (1), Loop-through, with
75 ohms automatic terminal function
Built-in speaker output
0.5 W (mono)
General
Power AC100 – 240 V, 50/60 Hz
Power consumption Maximum: approx. 72 W, 0.8 A – 0.4 A
Peak inrush current (1) Power ON, current probe method: 34A
(100V), 64 A (240V)
(2) Hot switching inrush current,
measured in accordance with European
standard EN55103-1: 55 A (230V)
Dimensions Approx. 493 × 408 × 264 mm
(not including the projection parts)
(19
1
/2 × 16
1
/8 × 10
1
/2 inches)
(w/h/d)
Mass Approx. 9.6 kg (21 lb 3 oz)
Operating conditions
Temperature 0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 to 1060 hPa
Storage and transport conditions
Temperature –20 °C to +60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied AC power cord (1)
AC plug holder (1)
Operating Instructions (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Warranty book (1)
Optional accessories
Mounting bracket MB-529
SDI input adaptor BKM-320D
Design and specifications are subject to change without notice.
Note
Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER DURING THE
WARRANTY PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.