Filter
Top Products
30 31
TM
14.5 : SECUR ET - VTH POLE MOUNT
The Tannoy VNET™ loudspeakers are fitted as standard with a
blanking plate on the base of the cabinet. However, should you ever
wish to mount the VNET™ onto a standard 35mm pole mount this
blanking plate can be quickly and easily removed and replaced by
a VTH pole mount. The same screws which secure the blanking
plate should be used to secure the VTH in position.
.
Description Quantity
VPC Pole Clamp 1
M10 Washer 1
M10 x 50mm Screw 1
M10 Nyloc Nut (Black) 1
14.6 : SECUR ET VCS CEILING SADDLE
The VCS ceiling saddle available in both black and white finishes,
and is to be used in conjunction with the VMY and a length of M10
threaded rod (not supplied by Tannoy Limited). The VCS ceiling
saddle allows the Tannoy VNET™ loudspeaker to be suspended at
a user defined distance from the ceiling as shown in Figure 1.
Included with the VCS is an M10 nut. This should be used to secure
and lock the threaded rod in place at the top of the ceiling saddle.
14.6 : SECUR ET VPC POLE CLAMP
The VPC pole clamp can be used along with the VMY yoke bracket
to suspend a Tannoy VNET™ loudspeaker from an overhead bar,
truss or suitable structure. Only the parts supplied should be used
to secure the VPC to the VMY yoke bracket.
The following items are included with each VPC:-
FIG 1.
15.0: SERVICE PARTS & ACCESSORIES
Full Range VNET Amplifier & DSP Module
7300 1045 Duals
7300 1062 Subs
VNET12
7900 0433 Driver Kit - 3142
7900 0441 Recone Kit - 3142
7900 0199 HF Diaphragm Kit
VNET12HP
7900 0715 Driver Kit - 3190
7900 0716 Recone Kit – 3190
7900 0717 HF Driver
7900 0718 HF Diaphragm Kit
VNET15
7900 0644 Driver Kit - 3816
7900 0646 Recone Kit - 3816
7900 0645 HF Diaphragm Kit 0282
VNET300
7900 0386 Driver Kit - 3138
7900 0387 Recone Kit - 3138
7900 0326 HF Diaphragm Kit
VNET15BP
7900 0596 Driver Kit - 3813
7900 0600 Recone Kit - 3813
VNET15HL
7900 0598 Driver Kit – 3815
7900 0602 Recone Kit – 3815
VNET18DR
7900 0599 Driver Kit - 4505
7900 0603 Recone Kit – 4505
VNET HARDWARE
8001 2780 VMY – Secur ET – Yoke Adjustable (Black)
8001 2790 VMY – Secur ET – Yoke Adjustable (White)
8001 2800 VMB – Secur ET – Wall Bracket (Black)
8001 2810 VMB – Secur ET – Wall Bracket (White)
8001 2820 VEB – Secur ET – Eyebolts M10
8001 2830 VCS – Secur ET – Ceiling Saddle (Black)
8001 2840 VCS – Secur ET – Ceiling Saddle (White)
8001 2850 VPC – Secur ET – Pole Clamp
8001 2860 VTH – Secur ET – Top Hat (Black)
8001 2870 VTH – Secur ET – Top Hat (White)
8001 3180 V12Y- Secur ET – Yoke Bracket (Black)
8001 3181 V12Y- Secur ET – Yoke Bracket (White)
8001 3190 V15Y- Secur ET – Yoke Bracket (Black)
8001 3191 V15Y- Secur ET – Yoke Bracket (White)
8001 2820 VEB – Secur ET – Eyebolts M10