Filter
Top Products
Up to 25 tracks can be programmed in the
desired order and played.
ªTo program tracks
1. In the Stop mode, press the [PLAY
MODE] button repeatedly until "PGM
MODE" appears in the display. After
"PGM MODE", the display shows "0m 00s
00p" (" " lights up).
2. Turn the [
µTRACK≤] dial so that the
desired track number indicator lights on
the music calendar, and press [PUSH
ENTER] on the dial.
… The track number blinks.
… Repeat this operation to program other
tracks.
… Tracks can be programmed automatical-
ly by simply pressing the numeric
buttons (1 to 9, 0, +10) on the remote
control unit to display their numbers
sequentially.
… When a track number of 21 or more is
selected, the " " indicator blinks.
However, the track number can still be
checked on the TRACK NO. display.
… The same track can be programmed
repeatedly.
… If you make a mistake in the track
number entry, press the [CLEAR] button.
Each press clears the current last track
in the program.
Playing Tracks in the Desired
Order (Program Playback)
3. Press the [¥PLAY] button to start
Program playback.
… The program is held in memory after
Program playback has been stopped by
pressing the [
ªSTOP] button or it has
stopped automatically at the end.
… Pressing the [
ªSTOP] button in the Stop
mode clears the program memory.
… When the total program playback time is
longer than 159 minutes and 59 seconds,
"---m--s" appears on the time counter.
… When the 25th track has been
programmed, "PGM Full !!" is displayed
and no more tracks can be programmed.
… Pressing the [PLAY MODE] button in the
Stop mode cancels the Program Play
mode and clears the program memory.
… The Program mode will not be canceled
even when the power is turned off, and
the programmed data will remain in the
deck.
… If you attempt program playback when
no programmed data is entered, normal
playback will start after "PGM Empty !!"
is displayed.
ªTo check the program contents
In the Play or Play-Ready mode, turn the
[
µTRACK≤] dial or press the [µ] or
[
≤] button on the remote control unit to
display the program contents.
ªTo delete a programmed track
In the Stop mode, press the [CLEAR] button.
Each press clears the current last track in
the program.
ªTo add a track to the program
In the Stop mode, turn the [
µTRACK≤]
dial to select the desired track number and
press [PUSH ENTER] on the dial.
A track can also be added from the remote
control unit by simply entering the track
number with the numeric buttons
(1 to 9, 0, +10).
… The new track is appended to the end of
the existing program.
– 13 –
ENGLISH
ªTo play tracks with spaces inserted
after every track (Auto Space playback)
The Auto Space playback function inserts a
3-second blank space between each track.
This makes possible music scan operations
when recording from MDs to analog tape.
1. Press the [AUTO SPACE] button on the
remote control unit once so that
"A_SPACE ON" is displayed. (" "
lights up.)
2. Press the [
¥PLAY] button.
… To release Auto Space Playback, press
the [AUTO SPACE] button repeatedly
until " " disappears.
ªTo pause after each track
(Auto Ready playback)
The deck can enter the Ready mode after
playing each track. This feature is
convenient when copying a single MD track
onto tape or when the tracks to be copied
are not continuous.
1. Press the [AUTO SPACE] button on the
remote control unit twice so that
"A_READY ON" is displayed.
(" " lights up.)
2. Press the [
¥PLAY] button.
… When playback is finished, the deck
pauses at the beginning of the next track.
3. Press the [
¥PLAY] or [πREADY] button
to start playing the next track.
… To release Auto Ready playback, press
the [AUTO SPACE] button repeatedly
until " " disappears.
… A
.
SPACE and A
.
READY playback cannot
be used together.
When Recording to Analog Tape
Buttons used on this page