Tascam US-16x08 Car Amplifier User Manual


 
TASCAM US-16x08
3
1 – Introduction
Features
Built-in Ultra-HDDA mic preamps with discrete construction
that achieves −125dBu EIN
Support for direct guitar input
Input specifications that can handle the sound pressures of
drum recording easily
8 XLR inputs that support +48V phantom power and 6 TRS
inputs that can be switched between −10 dBV and +4 dBu
Standalone mic preamp use also supported
Support for high resolution recording formats up to
24-bit/96kHz
USB 2.0 computer connection
Advanced DSP mixer with four-band equalizer and
compressor on each channel
Driver software that can be installed without connecting
the unit
Angled design provides excellent usability on a desktop
Tough metal casing can endure even hard use
Separate controls for line and headphones output volumes
Supports connection with an iPad or other iOS device
Operation confirmed with major DAW software (Sonar,
ProTools, Cubase, Live, Studio One, GarageBand)
MIDI input and output enable connection with keyboards
and other MIDI devices
Rack mount adapters and hex key included
Support for Windows and Mac
High 56dB input level range supports dynamic mic input
Balanced analog TRS output jacks suitable for connection to
powered monitors
Standard stereo TRS headphones jack with 70mW per
channel output
Low latency monitoring through the DSP mixer
Patch bay allows outputs to be assigned freely
Scene memories can store DSP mixer settings (up to 10
scenes can be stored and renamed)
8 balanced analog TRS output jacks
AC adapter included
Note about computer operation
If you are unsure about anything related to the basic operation
of a computer when it is mentioned in an explanation in this
manual, please refer to the computer operation manual.
This product incorporates a Blackfin® processor made by
Analog Devices, Inc.
Conventions used in this manual
The following conventions are used in this manual.
Switches, connectors and other physical parts of this unit
are written using a bold font like this: PHONES knob.
Information shown on the computer display is written like
this “OK”.
As necessary, additional information is provided under TIP,
NOTE and CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
CAUTION
Failure to follow these instructions could result in injury,
damage to equipment or lost recording data, for example.