Filter
Top Products
English - 26 -
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
Name
To change the name of a programme, select the
programme and press the RED button.
The fi rst letter of the selected name will be highlighted.
Press “
” or “ ” button to change that letter and “ ”
or “ ” button to select the other letters. By pressing
the RED button, you can store the name.
Move
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting
automatic tuning, Auto Programming System menu
will appear on the screen:
Press “ ” or “ ” button to select your country. If
you want to exit from A.P.S. function, press the
BLUE button. When you press OK or RED button
for starting automatic tuning, all stored programmes
will be erased and the TV will search for available
channels. During the search, the following OSD will
be displayed:
Whenever you press the BLUE button, APS function
stops and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.
Source Menu
Press “ ” or “ ” button and select the sixth icon.
Then press “ ” or OK button. Source menu appears
on the screen:
In source menu, highlight a source by pressing “
” or “ ” button and switch to that mode by
pressing “ ” button. Source options are; TV , DTV ,
EXT-1 , EXT-2 , SIDE AV , S-VIDEO, HDMI-1 , HDMI-2 ,
HDMI-3 , YPbPr or PC-VGA .
With the OK button you can set or remove a mark. When
a mark is removed; this source does not appear in the
OSD when you press the AV / Source button of the remote
control.
Note : Once you have connected optional equipment systems
to your TV, you should select the required input to view
pictures from that source.
Media Browser Menu
If you plug a valid USB fl ash drive to the TV set, the
following menu will be displayed on the screen if
the plugged USB unit is compatible with this TV set.
Contents of this screen will change in accordance with
the fi les stored on your USB drive.
• You can display pictures (.jpg fi les) or play music
(.mp3 fi les) through the Media Browser.
Note :
• See the section, “Using Digital Multimedia Connectors”,
before plugging a device to the TV set.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 26A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 26 17.06.2010 13:10:1517.06.2010 13:10:15