Filter
Top Products
English - 27 -
• If you enter the Media Browser menu without plugging a
USB device to the TV, “No USB Device” message will be
displayed on the menu screen.
Note : Unknown fi le formats will be marked with a question
mark.
You can use the following remote control buttons to
browse between fi les stored on your USB drive:
Up / Down Explores the fi les.
OK Views / plays a selection /
enter folder.
Menu Back.
Red Filters JPG fi les.
GREEN Filters MP3 fi les.
“
” / “ ” Select next or previous
fi le.
Playing .mp3 Files
If you play a mp3 fi le, the following screen will be
displayed during the playback:
You can use cursor buttons on the remote control for
available functions.
Playing .jpg Files
If you play a jpg fi le, the following screen will be
displayed while viewing:
You can use cursor buttons on the remote control for
available functions.
PC Mode Menu System
See “Connecting the LCD TV to a PC” section for
connecting a PC to the TV set.
For switching to PC source, press “SOURCE” button
on your remote control and select PC input. You can
also use “Source” menu to switch to PC mode.
Note that PC mode menu settings are available only while
the TV is in PC source.
PC Position Menu
Select the first icon by pressing “ ” or
“ ” button. PC Position menu appears on the
screen:
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Select Autoposition item by using “
” or “ ” buttons.
Press OK or “ ”, “ ” button.
Warning : Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Select H Position item by using “
” or “ ” button.
Use “ ” or “ ” button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top
or bottom of the screen.
Select V Position item by using “
” or “ ” button.
Use “
” or “ ” button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 27A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 27 17.06.2010 13:10:1517.06.2010 13:10:15