Filter
Top Products
Down loading / Up loading
Af ter an event is set-up it may be down loaded to a
DataFlash® card for the even tual down loading into a FM-1
and thus to a sys tem of up to 10 base sta tions.
A snap shot of a sys tem of up to 10 base sta tions may also be
up loaded to the SMP in or der to ex am ine the set tings of the
sys tem for trou ble-shoot ing, use the sys tem as a ‘base line” for
set ting up other events, or just for re cords.
Down loading an Event
1. Open FM-1 Sys tem Man ger Pro gram
2. Cre ate an Event
3. Save Event
4.
Down load Event to QSB-1 and DataFlash® mem ory card.
5. Place mem ory card in an FM-1 and down load card to FM-1.
Up loading a Snap Shot
1.
Down load a Snap shot(s) to the DataFlash® mem ory
card from the FM-1
2.
Re move the DataFlash® card from the FM-1 and
place in the QSB-1.
3. Open FM-1 Sys tem Man ger Pro gram
4. Up load the snap shot to the SMP from the mem ory card
that is in the QSB-1.
NOTE: Snap Shots are named se quen tially by the FM-1. The
1st snap shot will be, "snap shot 0" the sec ond, "snap shot 1",
etc. Up to 10 snap shots may be taken.
2-6