Telex SMP Car Stereo System User Manual


 
Sec tion
3
QSB-1
QSB-1
The QSB-1 (Qard Se rial Bus) pod in ter faces with the SMP
(Sys tem Man ager Pro gram) via a USB con nec tion to the com --
puter. The QSB-1 al lows the user to down load events into a
small, con ve nient, DataFlash® mem ory card. Event(s) and
Snap shot(s) of the sys tem can also be up loaded to the SMP
from the card via the QSB-1.
The card for use with the QSB-1 is a 2 MB DataFlash® mem --
ory card. These may be pur chased in var i ous elec tronic stores
or from Telex, see the “Ac ces so ries and Re place ment Parts”
sec tion of the man ual.
NOTE: The 2 MB card is the only size cur rently com pat i ble
with the FM-1, QSB-1 and SMP. Larger or smaller
DataFlash® cards will NOT work.
Con nec tions
Fig ure 3-1
The QSB-1 Card Reader
1.
Card Slot - Only use 2 MB DataFlash® mem ory cards.
2.
USB Con nec tion – Con nect USB ca ble from com puter.
The QBS-1 is pow ered from the com puter via it’s USB ca ble.
DataFlash® is a reg is tered trade mark of Atmel® Cor po ra tion
3-1
2
1
QSB-1 Spec i fi ca tions
Tem per a ture Range ....................................................................................................................32°F to 104°F (0°C to 40°C)
Di men sions...................................................................................................................................2.47”W x 0.97”H x 3.37”D
(6.3 cm x 2.5 cm x 8.6 cm)
Weight.....................................................................................................................................................................2 oz (57 g)
USB Type....................................................................................................................................................Ver sion 1.1 or 2.0
Mem ory Card Type..........................................................................................................................DataFlash®, 2 MB Only
NOTE: Item 2 is Lo cated
on back of Unit