Filter
Top Products
ViewSonic CD4620 31
TILING
y TILING demonstrates multiple screens. This feature provides a single large screen using up to 25 monitors.
y It will be able to divide up to 5 each H and V.
y This requires you to feed the PC output into each of the monitors through a distributor.
y H MONITORS: Select number of horizontal divide.
y V MONITORS: Select number of vertical divide.
y POSITION: Select a position to expand the screen.
y FRAME COMP: Works in tandem with TILING to compensate for the width of the tile bezels in order to accurately display the
image.
y ENABLE: Select “YES”, the monitor will expand the selected position.
y PIP and STILL will be disabled when “TILING” is activated.
POWER ON DELAY
y Adjusts the delay time from “standby” to “power on” mode.
y “POWER ON DELAY” time is selectable from OFF, 2sec, 4sec, 6sec, 8sec, 10sec, 20sec, 30sec, 40sec and 50sec.
DATE AND TIME
y Adjusts the current date and time for internal clock.
y You should set this function when you use “SCHEDULE”.
SCHEDULE
y Programs the monitor's working schedule.
y Schedule the power on and power off with hour and a day of the week. Also sets the input port.
y This OSD can't remove except EXIT. (see “NOTE 2” on page 30 for further information)
MONITOR ID
y ID numbers for remote control are assigned to CD4620 monitors that are multi-connected via RS-232C.
y ID numbers 1 to 26 are selectable.
DDC/CI
y Use to turn ON or OFF the DDC/CI communication function. Select ON for normal use.
SYNC TYPE
y Select “0.3V” for 0.3 Composite Sync.
y Select “TTL” for TTL Sync.
ADVANCED OPTION RESET
y Selecting ADVANCED OPTION reset allows you to reset all OSD settings from ADVANCED OPTION settings, except for
DATE & TIME.
y Select “YES” and press “SET” button to restore the factory preset data.
y Press “EXIT” button to cancel and then return the previous menu.
NOTE 1: IMAGE PERSISTENCE
y Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence
occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD
monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be
avoided.
y To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an
image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to
erase the image.
y As with all personal display devices, ViewSonic recommends displaying moving images and using a moving screen
saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Please set “POWER SAVE”, “SCREEN SAVER”, “DATE &TIME” and “SCHEDULE” functions to further reduce the risk
of Image persistence.
Downloaded From TV-Manual.com Manuals