VIZIO VSB200 User Manual
16
www.VIZIO.com
Connecting a
Connecting a Connecting a
Connecting a Computer
ComputerComputer
Computer
*Digital Connection:
If your Computer has a SPDIF (optical) digital audio output, you can connect it to the OPTICAL AUDIO IN
on the HD Sound Bar
1. Turn off the power to the HD Sound Bar and Computer.
2. Connect one end of the Optical (SPDIF) cable to the digital audio output on the Computer.
3. Connect the other end of the Optical (SPDIF) cable to the Digital audio input on the HD Sound Bar.
4. Turn on the power to the HD Sound Bar and Computer.
5. Select the Optical input by pressing the Input Button on the top of the HD Sound Bar or Remote
Control.
Note: When using the Optical Input on the HD Sound Bar, be sure to set the source device output mode
to PCM. Refer to the Computer user manual for more information about the audio output settings of the
product.
*SPDIF Cable available separately.
Analog Connection:
1. Turn off the power to the HD Sound Bar and Computer.
2. Connect one end of the audio cable to the analog audio output on the Computer*.
3. Connect the other end of the audio cable (white and red connectors) to one of the analog audio inputs
on the HD Sound Bar.
4. Turn on the power to the HD Sound Bar and Computer.
5. Select the associated input by pressing the Input Button on the top of the HD Sound Bar or Remote
Control.
*Note: Computer analog audio output commonly uses a 1/8” (3.5mm) Stereo Mini-Jack port. In this
configuration, a 1/8” (3.5mm) Stereo Mini-Jack to RCA stereo cable will be required.