Filter
Top Products
VIZIO VSB200 User Manual
2
www.VIZIO.com
Important Safety Instructions
Important Safety InstructionsImportant Safety Instructions
Important Safety Instructions
The HD Sound Bar is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the HD Sound Bar from being damaged, the
following rules should be observed for its installation, use, and maintenance. Please Read the
following safety instructions before operating the HD Sound Bar. Keep these instructions in a safe
place for future reference.
• To reduce the risk of electric shock or component damage, switch off the power before
connecting other components to the HD Sound Bar.
• Unplug the power cord before cleaning the HD Sound Bar. A damp cloth is sufficient for cleaning.
Do not use a liquid or a spray cleaner on the HD Sound Bar. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving the HD Sound Bar from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on the HD Sound Bar to avoid causing
fire, electric shock, or component damage.
• A distance of at least 3 feet should be maintained between the HD Sound Bar and any heat
source, such as a radiator, heater, oven, amplifier etc. Do not install the HD Sound Bar close to
smoke. Operating the HD Sound Bar close to smoke or moisture may cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of the HD Sound Bar and to protect it from overheating, be sure these openings
are not blocked or covered. Do not place the HD Sound Bar in a bookcase or cabinet unless
proper ventilation is provided.
• Never push any object into the slots and openings on the HD Sound Bar enclosure. Do not place
any objects on the top of the HD Sound Bar. Doing so could short circuit parts causing a fire or
electric shock. Never spill liquids on the HD Sound Bar.
• The HD Sound Bar should be operated only from the type of power source indicated on the label
on the AC/DC Adapters. If you are not sure of the type of power supplied to your home, consult
your dealer or local power company.
• Only power of the marked voltage can be used for your HD Sound Bar. Any other voltage than
the specified voltage may cause fire or electric shock
• The power cord must be replaced when using different voltage than the voltage specified. For
more information, contact your dealer.
• The HD Sound Bar AC/DC Adapters are equipped with a three-pronged grounded plug (a plug
with a third grounding pin). This plug will fit only into a grounded power outlet. This is a safety
feature. If your outlet does not accommodate the three-pronged, have an electrician install the
correct outlet, or use an adapter to ground the HD Sound Bar safely.
• Do not defeat the safety purpose of the grounded plug.
• When connected to a power outlet, power is always flowing into the HD Sound Bar. To totally
disconnect power, unplug the power cord.
• The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-isolated, dangerous
voltage within the inside of the HD Sound Bar that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
• The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and servicing instructions in the literature
accompanying your HD Sound Bar.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be located near the HD Sound Bar and be easily accessible.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power
cord during electrical storms.