Filter
Top Products
Owner’s Manual 17
Operation
Turning on the TV just after installation
Turning on the TV (power cord is still connected)
1. Connect power cord correctly.
2. Press the ON/OFF button on the TV. At this moment, the TV is switched to standby mode. Press the INPUT
SELECT,
D / E
button on the TV or press the POWER, INPUT SELECT, MULTIMEDIA, CH (
D / E
), FAV CH,
Number button on the remote control to switch the TV on.
• Press the ON/OFF button on the TV to turn the TV on.
1. If the TV was turned off with the ON/OFF button on the TV
2. If the TV was turned off with the remote control and the ON/OFF button on the TV
• Press the ON/OFF button on the TV and then press the INPUT SELECT button on the TV. Or, on
the remote control, press either POWER, INPUT SELECT, MULTIMEDIA, CH (
D / E
), FAV CH,
Number to turn the TV on.
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
D
/
E
button to select the SPECIAL menu.
2. Press the G button and then use
D
/
E
button to select Language.
3. Press the G button and then use
D
/
E
button to select your desired language.
From this point on, the on-screen menus will be shown in the language of your
choice.
4. Press the MENU button to save.
SPECIAL
Prev.
Language G
Key lock
ISM Method
Low power
Set ID
Caption / Text
Captions
OSD Rotate
English
Español
Français
SPECIAL
MENU
Operation
Operation
Menu Language Selection
Menu Language Selection
T
T
urning on the TV
urning on the TV
• CAUTION
If you connect or disconnect the Tuner Box cable to the TV, the TV is switched to standby mode.