Filter
Top Products
8 Plasma TV
Introduction
Connection Options
Connection Options
(MONO)
R
AUDIO
VIDEO
L
AV(EXPANDED) INPUT
R
AUDIO
VIDEO
L
AV OUTPUT
EXPANDED OUTPUT
REMOTE
CONTROL
ANT INDC IN
(DC 12V)
+75 Ω
R
( )
( )
( )
( )
L
EXPANDED
INPUT
VIDEO
INPUT
RS-232C INPUT
(CONTROL/SERVICE)
EXTERNAL SPEAKER
YP
B
P
R
(MONO)
R
AUDIO
L
R
AUDIO
L
S-VIDEO
AC INPUT
AUDIO INPUT
AUDIO INPUT
AUDIO INPUT
REMOTE
CONTROL
COMPONENT INPUT
DVI INPUT
RGB INPUT
RGB OUTPUT
6
1. ANTENNA INPUT PORT
Connection for an over-the-air or terrestrial antenna, your
cable TV wire, or cable box.
2. AV (EXPANDED) INPUT
Connection for audio/video out from external equipment.
3. AV OUTPUT
Connection for a second TV or monitor.
4. REMOTE CONTROL
Connect your wired remote control to the remote control port
on the TV.
5. EXPANDED OUTPUT
Connect the TV to the TV with the tuner box cable.
6. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to ‘Speaker & Speaker
Stand’ manual.
7. RS-232C INPUT (CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
8. DVI (Digital Visual Interface) INPUT/
RGB INPUT/AUDIO INPUT JACKS
Connect the TV output connector from a PC to the appro-
priate input port.
9. RGB OUTPUT PORT
You can watch the RGB signal on another monitor, connect
RGB OUTPUT to another monitor’s PC input port.
10. EXPANDED INPUT
Connect the plasma display to the Tuner with the tuner box
cable supplied.
11. COMPONENT INPUT/AUDIO INPUT JACKS
Connect a component video device to these jacks.
12. REMOTE CONTROL
Connect your wired remote control to the remote control
port on the TV.
13. S-VIDEO INPUTS
Connect S-Video out from an S-VIDEO VCR to the S-
VIDEO input.
AUDIO/VIDEO INPUT JACKS
Connect audio/video out from external equipment to these
jacks.
14. POWER CORD SOCKET
This TV operates on an AC power. The voltage is indicated
on the Specifications page. Never attempt to operate the
TV on DC power.
Back Connection Panel
Back Connection Panel
7 9 10 128 13 1411
1 2 3 4 5