Filter
Top Products
Owner’s Manual 27
Operation
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select Position.
3. Press the G button and then use
D / E /
F / Gbutton to adjust the position.
4. Press the ENTER button to save.
SCREEN
Prev.
Auto config.
ARC
Zoom in/out
Position G
Manual config.
Screen adj.
Reset
VGA Mode
SCREEN
MENU
SCREEN
Prev.
Auto config.
ARC
Zoom in/out
Position
Manual config. G
Screen adj.
Reset
VGA Mode
SCREEN
MENU
Manual Configure (RGB-PC mode only)
Manual Configure (RGB-PC mode only)
Adjusting Horizontal/ V
Adjusting Horizontal/ V
ertical Position
ertical Position
- If the image still isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture
Phase manually.
- To correct the screen size, adjust Clock.
- This function works in the following mode:
RGB-PC, RGB-DTV (480p,720p,1080i), COMPONENT (480p,720p,1080i).
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select Manual config..
3. Press the G button and then use
D / E
button to to select Phase or Clock.
4. Use the F / G button to make appropriate adjustments.
• The Phase adjustment range is 0 ~ 31.
• The Clock adjustment range is -50 ~ +50.
5. Press the ENTER button to save.
Phase 0
Clock 0
SCREEN
Prev.
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj. G
Reset
YNR
SCREEN
MENU
Screen
Screen
Adjustments (TV
Adjustments (TV
, V
, V
ideo(Exp.), V
ideo(Exp.), V
ideo, S-V
ideo, S-V
ideo and Component 480i mode only)
ideo and Component 480i mode only)
- Use this function to correct jittering or picture instability while viewing a video tape.
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select Screen adj..
3. Press the
G button and then use
D / E
button to select TV or VCR.
• Select the VCR option if watching a VCR.
• Select the
TV option for other equipment. (Except VCR)
4. Press the ENTER button to save.
TV
VCR
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the
G button and then use
D / E
button to select Reset.
3. Press the G button.
• You can initialize Zoom in/out, Manual config., Position, Split zoom, PIP size, PIP
position and sub picture size for double window.
Initializing (Reset to original factory value)
Initializing (Reset to original factory value)
- This function operates in every mode.
- Use the Reset option to initialize the adjusted settings.
SCREEN
Prev.
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset G
YNR
To set
SCREEN
MENU
D
F
G
E