Filter
Top Products
P-660H-Tx v2 Support Notes
The following table describes the fields in this screen.
Field Description Option/Example
Type
You can select one of the five mapping types from the
pull-down menu
1. One-to-One
2. Many-to-One
3. Many-to-Many
Overload
4. Many-to-Many No
Overload
5. Server
Start This is the starting local IP address (ILA) 0.0.0.0
Local
IP
End
This is the ending local IP address (ILA). If the rule is
for all local IPs, then put the Start IP as 0.0.0.0 and the
End IP as 255.255.255.255. This field is N/A for
One-to-One type.
255.255.255.255
Start
This is the starting global IP address (IGA). If you have
a dynamic IP, enter 0.0.0.0 as the Global Start IP.
0.0.0.0
Global
IP
End
This is the ending global IP address (IGA). This
field is N/A for One-to-One, Many-to-One and Server
types.
200.1.1.64
Note: For all Local and Global IPs, the End IP address must begin after the IP
Start address, i.e., you cannot have an End IP address beginning before the
Start IP address.
• Configure Address Mapping Sets in CLI
Setp 1: Telnet to the P-660H-Tx v2. (We suppose the LAN IP Address of
P-660H-Tx v2 is 192.168.1.1)
Step 2: Select one Address Mapping Set (#1~#8) by command ‘ip nat
addrmap map [map #] [set name]’ (set name is optional). Suppose we
configure set 2 in the example.
44
All contents copyright © 2006 ZyXEL Communications Corporation.