Filter
Top Products
P-660H-Tx v2 Support Notes
The SNMP related settings in P-660H-Tx v2 are configured in Web
Configurator, Advanced Setup, Advanced -> Remote MGNT -> SNMP The
following steps describe a simple setup procedure for configuring all SNMP
settings.
Key Settings:
Option Descriptions
Get
Community
Enter the correct Get Community. This Get Community must match the
'Get-' and 'GetNext' community requested from the NMS. The default is
'public'.
Set
Community
Enter the correct Set Community. This Set Community must match the
'Set-community requested from the NMS. The default is 'public'.
Trusted
Host
Enter the IP address of the NMS. The P-660H-Tx v2HW-DX will only
respond to SNMP messages coming from this IP address. If 0.0.0.0 is
entered, the P-660H-Tx v2HW-DX will respond to all NMS managers.
Trap
Community
Enter the community name in each sent trap to the NMS. This Trap
Community must match what the NMS is expecting. The default is
57
All contents copyright © 2006 ZyXEL Communications Corporation.